Grandstream-networks HANDYTONE 486 Uživatelský manuál stáhnout pdf (Strana 8)

HandyTone-486 User Manual Grandstream Networks, Inc.

5 Basic Operations

5.1 Get Familiar with Key Pad and Voice Prompt

HandyTone-486 has stored a voice prompt menu (Interactive Voice Response or IVR) for quick

browsing and simple configuration.

To enter this voice prompt menu, simply press the button or “***” from the analog phone.

Menu Voice Prompt User’s Options

Main Menu “Enter a Main Option” Enter ‘*’ to next option and “#” back to main

menu. Enter 01-06, 99 menu option

01 “DHCP Mode”,

“Static IP Mode”

Enter ‘9’ to toggle the selection

02 “IP Address “ + IP address It will prompt you with the current WAN IP

address.

Enter 12 digit new IP address if in Static IP

Mode

03 “Subnet “ + IP address Same as menu 02

04 “Gateway “ + IP address Same as menu 02

05 “DNS Server “ + IP address Same as menu 02

06 “TFTP Server “ + IP address Same as menu 02

47 “Direct IP Calling” When entered, you will be prompted a dial

tone, then enter 12 digit IP address

This menu can be also entered by pressing the

button again

86 “Voice Messages Pending”

“No Voice Messages”

Enter 9 to dial pre-configured phone number to

retrieve VM

99 “RESET” Enter ‘9’ to confirm the RESET

Enter MAC address to restore factory default

setting

“Invalid Entry” Automatically return to Main Menu

NOTES:

• Once the button is pressed, it enters the IVR main menu. If the button is pressed again, while it

is already in the voice prompt menu state, it jumps to “Direct IP Calling” option and dial tone

plays in this state to allow direct IP to IP calling

• ‘*’ functions similar to ‘↓’ key of BT-100 phone to select the next menu option

• ‘#’ returns back to main MENU

• ‘9’ is similar to ENTER key in many cases to confirm an option

• All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP

address. Once all digits are accumulated, it will automatically process them

• For IP address input, ignore the dot and key in the digit directly, add 0 before octet with less

than three digits. e.g.: IP: 192.168.1.10, key in: 192 168 001 010

• Key entry cannot be deleted but the phone may prompt error once it is detected

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Komentáře k této Příručce

Žádné komentáře

Grandstream-networks HANDYTONE 486 Uživatelský manuál Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Hardware Grandstream-networks HANDYTONE 486