Grandstream Networks GXW400x Uživatelský manuál stáhnout pdf (Strana 13)

Grandstream Networks, Inc. GXW-400x User Manual Page 13 of 31

Firmware 1.0.0.17 Last Updated: 12/2006

BASIC OPERATIONS

UNDERSTANDING GXW VOICE PROMPTS

GXW–400x has a stored voice prompt menu for quick browsing and simple configuration. Enter *** on

the standard analog phone connected to any FXS port to use the voice prompt menu.

TABLE 5: DEFINITIONS OF THE GXW VOICE PROMPTS

Menu Voice Prompt User’s Options

Main Menu

“Enter a Menu Option” Enter “*” for the next menu option

Enter “#” to return to the main menu

Enter 01 – 06, 47, 86 or 99 Menu option

“DHCP Mode”, or

“Static IP Mode”

Enter ‘9’ to toggle the selection

“Static IP Mode”: configure all the IP address information through

menu options 02 to 05.

“Dynamic IP Mode”: IP address information is retrieved from the

DHCP server automatically at reboot.

“IP Address “ + IP address The current WAN IP address is announced

Enter 12-digit new IP address if in Static IP Mode.

“Subnet “ + IP address Same as Menu option 02

“Gateway “ + IP address Same as Menu option 02

“DNS Server “ + IP address Same as Menu option 02

Preferred Vocoder Enter “9” to go to the next selection in the list:

• PCM U / PCM A

• G-723

• G-729

• iLBC

• G-726-32

• G728

• G729E

“MAC Address” Announces the Mac address of the unit.

WAN Port Web Access

Enter “9” to toggle between enable and disable

Firmware Server IP Address

Announces current Firmware Server IP address. Enter 12 digit new

IP address.

Configuration Server IP

Address

Announces current Config Server Path IP address. Enter 12 digit

new IP address.

Upgrade Protocol

Upgrade protocol for firmware and configuration update. Enter “9”

to toggle between TFTP and HTTP

Firmware Version Firmware version information.

Firmware Upgrade

Firmware upgrade mode. Enter “9” to rotate among the following

three options:

1. always check

2. check when pre/suffix changes

3. never upgrade

“Direct IP Calling”

User will be prompted with a dial tone to dial a 12-digit IP address

to make a direct IP call.

(For details, see Make a Direct IP Call)

“RESET” Enter “9” to reboot the device; or

Enter MAC address to restore factory default setting.

“Invalid Entry” Automatically returns to Main Menu

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Komentáře k této Příručce

Žádné komentáře

Grandstream Networks GXW400x Uživatelský manuál Strana 13

Komentáře k této Příručce

Související produkty a manuály pro Brány / ovladače Grandstream Networks GXW400x